NVM9
NOVA
Availability: | |
---|---|
Quantity: | |
【Features】
1. Small, light and portable;
2. Sine wave 1200W constant power output;
3. Support both mains and photovoltaic charging methods;
4. AC 220V/110V, DC 5V, 9V, 12V, 15V, 20V and other voltage outputs;
5. High-performance, high-safety, high-power 32140 lithium iron phosphate batteries;
6. Eight system protection functions such as undervoltage, overvoltage, overcurrent, overtemperature, short circuit, overcharge, and overdischarge;
7. Use a large-screen LCD to display power and function indications;
8. Support QC3.0 fast charge function;
9. 0.3S quick start, high efficiency.
【Special Technology】
1) Using engineering ABS+PC material, it is rigid and tough, and it creates a perfect curve.
2) The surface of the casing is clean and free from scratches, deformations, and shading.
3) The contacts of the output and input interface are free of rust, the socket is tight and the sliding cover is smooth.
4) The joint between the shells should be in close contact, and the width of the visible gap at the joint should not be greater than 1mm;
5) The internal wiring layout is beautiful and neat.
6) The foot pads are non-slip, shockproof, and prevent smoothness.
【Features】
1. Small, light and portable;
2. Sine wave 1200W constant power output;
3. Support both mains and photovoltaic charging methods;
4. AC 220V/110V, DC 5V, 9V, 12V, 15V, 20V and other voltage outputs;
5. High-performance, high-safety, high-power 32140 lithium iron phosphate batteries;
6. Eight system protection functions such as undervoltage, overvoltage, overcurrent, overtemperature, short circuit, overcharge, and overdischarge;
7. Use a large-screen LCD to display power and function indications;
8. Support QC3.0 fast charge function;
9. 0.3S quick start, high efficiency.
【Special Technology】
1) Using engineering ABS+PC material, it is rigid and tough, and it creates a perfect curve.
2) The surface of the casing is clean and free from scratches, deformations, and shading.
3) The contacts of the output and input interface are free of rust, the socket is tight and the sliding cover is smooth.
4) The joint between the shells should be in close contact, and the width of the visible gap at the joint should not be greater than 1mm;
5) The internal wiring layout is beautiful and neat.
6) The foot pads are non-slip, shockproof, and prevent smoothness.